Windows 10: Replace SATA Disk with SSD - Disk Clone Using EaseUS Todo Backup Free

REMARK: For EaseUS Todo Backup Free installation, kindly refer to 'Windows 10: Replace SATA Disk with SSD - Install EaseUS Todo Backup Free'

MATERIALS'

1. Kingston A400 SA400S37/120G

2. SATA to USB Connector

STEPS'

1. Connect the new SSD disk into laptop with SATA to USB connector

2. Run 'EaseUS Todo Backup Free 11.0'

3. On 'User Account Control' > Yes

4. Click on 'Clone' on left hand panel

5. On 'Source:' Select 'Hard disk 0 (xxx GB, Basic, MBR) > Next

6. On 'Source: Disk 0 *:C:*: ---> Target:', Select 'Hard disk 1 (XXX GB, Basic, GPT, USB)' > Next

7. Proceed > Finish

8. Shutdown the laptop > Remove battery > Remove SATA disk from disk slot > Slot in new SSD disk > Reboot the laptop.

URL: https://www.easeus.com/backup-utility/copy-and-clone-hard-drive.html

Windows 10: Replace SATA Disk with SSD - Install EaseUS Todo Backup Free

1. Download EaseUS Todo Backup Free 11.0

2. Run 'tb_free.exe'

3. On 'User Account Control' > Yes

4. Select Setup Language: English > OK 

5. Next > Accept > Next >

6. On 'Select Additional Tasks', UNCHECK both > Next > Next > Finish

7. On 'Activate now' > Later

Sonoff S20: Set Loop timer

REMARK: For EWeLink Setup, kindly refer to EWeLink Mobile Apps Installation

                 For pairing between Sonoff S20 with EWeLink, kindly refer to Pairing Sonoff S20 With EWeLink

1. Open EWeLink apps

2. Click on Sonoff device name; i.e: Switch1

3. Click on 'ON' if the device is in 'OFF' state

4. Loop timer:

   Restart cycle: 0 Hour 10 min, start in StatusOnce: OFF

   After: 0 Hour 10 min, change status to: ON

   Start time: 2018 1 1 08 00

   OK

Sonoff S20: Set Timer

REMARK: For EWeLink Setup, kindly refer to EWeLink Mobile Apps Installation

                 For pairing between Sonoff S20 with EWeLink, kindly refer to Pairing Sonoff S20 With EWeLink

1. Open EWeLink apps

2. Click on Sonoff device name; i.e: Switch1

3. Click on 'ON' if the device is in 'OFF' state

4. Timer > + (Add countdown timer):

   State: OFF

   After: 00 Day 00 Hour 30 Minute

   Save

Sonoff S20: Set Schedule

REMARK: For EWeLink Setup, kindly refer to EWeLink Mobile Apps Installation

                 For pairing between Sonoff S20 with EWeLink, kindly refer to Pairing Sonoff S20 With EWeLink

1. Open EWeLink apps

2. Click on Sonoff device name; i.e: Switch1

3. Click on 'ON' if the device is in 'OFF' state

4. Schedule > (+) New Timer > Set as follow:

   Repeat:

   Repeat: Tick

   Day: Mon Tue Wed Thu

        Fri Sat Sun

   State: OFF

   Time: 03  00

   Save